The TL series intelligent voltage stabilizer adopts WIFI, Bluetooth BLE communication method.Remote control anytime and anywhere, intelligent voltage stabilization, safe use of electricity and style life, timed power on, mobile phone remote real-time viewing of the output voltage, current, power temperature and control on/off the output voltage of the voltage stabilizer.
And it adopts the power core PN6365 quasi-resonant primary controller with integrated zero standby mode and a typical 720V high avalanche intelligent power. The MOSFET is suitable for high-performance intelligent power supply with simplified peripheral components.
The motor drive circuit adopts a wide working voltage range of 3-25V, with braking, over current and over temperature functions.
The single-chip microcomputer adopts a high-performance 32-bit Cortex-m4 microprocessor with a CPU operating speed of up to 120Mhz and a built-in digital signal processor, which can support up to 64KFlash and 16KB SRAM, which are unmatched by traditional 8-bit computers. .
Zhejiang Tailei Electrical Co., Ltd. focuses on the development and production of intelligent voltage regulator, Welcome to order.
SPECIFICATIONS
Input voltage | 140-260V AC |
Input frequnency | 50/60Hz |
Output voltage | 220V AC/110V AC |
Output precision | 220V+/-3%,110V+/-6% |
Time delay | 3′s short time,180′s long time |
Load power factor | 0.8 |
Phase | single phase |
Operating temperature | 0-40℃ |
Storage temperature | -15℃-45℃ |
Operating relative humidity | 10%RH-102%RH |
Customize option for specification and availability please contact TAILEI | |
DIMENSION WEIGHT
MODEL | QTY/CTN | MEAS(cm) | G.W.(kg) | N.W.(kg) | COMTAINER20(PCS) |
SVC-C 500VA | 4 | 42.5*25.5*36 | 16.5 | 14.5 | 2868 |
SVC-C 1KVA | 4 | 50*27.5*39.5 | 19.5 | 18 | 2070 |
SVC-C 1.5KVA | 4 | 50*27.5*39.5 | 23.5 | 22 | 2070 |
SVC-C 2KVA | 2 | 60*33*25.5 | 17.8 | 16 | 110 |
SVC-C 3KVA | 2 | 57*37.5*29.5 | 22 | 20 | 880 |
SVC-C 5KVA | 1 | 49*40*28.5 | 17.5 | 15 | 500 |
SVC-C 8KVA | 1 | 49*40*28.5 | 22.5 | 21 | 500 |
SVC-C 10KVA | 1 | 49*40*28.5 | 25.5 | 24 | 500 |
SVC-C 15KVA | 1 | 49.5*53*82 | 67 | 60 | 130 |
SVC-C 20KVA | 1 | 49.5*53*82 | 72 | 65 | 130 |
SVC-C 30KVA | 1 | 52*55*92 | 85 | 76 | 105 |
Precautions:
1. The voltage of network input must conform to the demand of AVR, for optimum operation.
2. Connect all plugs securely.
3. Always turn AVR power switch on first, the turn appliance power switch on.(Failure to do so may cause AVR fuse to blow)
4. For best results, do not use if overload condition exists.
5. Do not use in overly humid or flammable surroudings; avoid contact with any liquids.
6. The relationship between the output capacity and input voltage as following picture and diagram:
Overload | Utmost using time |
20% | 60 minutes |
40% | 32 minutes |
60% | 5 minutes |
Long time overload is forbidden.