SVC series Servo motor control vertical type single phase AC automatic voltage stabilizer, which provides you with a perfection for connected equipments. A voltage regulator is a device that stabilizes the output voltage.The voltage regulator is composed of voltage regulating circuit, control circuit and servo motor.When the input voltage or load changes, the control circuit will sample, compare and amplify, and then drive the servo motor to rotate to change the position of the carbon brush of the voltage regulator. By automatically adjusting the number of turns of the coil, the output voltage can be kept stable.
Voltage regulator can be widely used in: industrial and mining enterprises, oil fields, railways, construction sites, schools, hospitals, post and telecommunications, hotel, scientific research departments such as computer, precision machine tools, computer tomography (CT) of photography, precision instruments, test equipment, elevators, lighting, imported equipment and production lines and other places of need stable power supply voltage.It is also suitable for the users at the end of the low-voltage distribution network with too low or too high voltage and large fluctuation range, as well as the electrical equipment with large load variation. It is especially suitable for all places with high requirements on the waveform of the power grid.High power compensation type power regulator can be connected to fire power, water power, small generator.
SPECIFICATIONS
Input voltage | 140-260V AC |
Input frequnency | 50/60Hz |
Output voltage | 220V AC/110V AC |
Output precision | 220V+/-3%,110V+/-6% |
Time delay | 3′s short time,180′s long time |
Load power factor | 0.8 |
Phase | single phase |
Operating temperature | 0-40℃ |
Storage temperature | -15℃-45℃ |
Operating relative humidity | 10%RH-102%RH |
Customize option for specification and availability please contact TAILEI | |
DIMESION WEIGHT :
Precautions:
1. The voltage of network input must conform to the demand of AVR, for optimum operation. 2. Connect all plugs securely. 3. Always turn AVR power switch on first, the turn appliance power switch on.(Failure to do so may cause AVR fuse to blow) 4. For best results, do not use if overload condition exists. 5. Do not use in overly humid or flammable surroudings; avoid contact with any liquids. 6. The relationship between the output capacity and input voltage as following picture and diagram: | |
Overload | Utmost using time |
20% | 60 minutes |
40% | 32 minutes |
60% | 5 minutes |
Long time overload is forbidden.
