TLS（H）wall mount series AC automatic voltage stabilizer with Bigger display ,You can use the display for our SVC series ,TLS series,TLB series…
This kind voltage stabilizer choose abroad chip and zero-crossing design and making relay in cutting in near zero position and producing small fire and in order to extend the service life of the product.
Fluctuations of the voltage in the electrical network above the permissible norms lead to negative consequences for electronic and electrical equipment.AC voltage stabilizers are intended to provide a quality and secure work of different devices under conditions of unstable voltage .
The advantages of this model:
◪ Wide voltage regulation range 100-260V~ or 140-260V selectable ◪ Zero cross switching technology ◪ Microprocessor CPU control circuit ◪ Built-in current detector and smart cooling system ◪ Full information graphic led display ◪ Optional bypass switch available | |
Integrated Graphic LED Display
SPECIFICATIONS
TLS（H）-500VA/1000VA/1500VA/2000VA/3000VA/5000VA/8000VA/10000VA | |
Input voltage | 140-260v/100-260v Or customize |
Input frequnency | 50/60Hz |
Output voltage | 220V AC/110V AC |
Output precision | 220V+/-8%,110V+/-10% |
Time delay | 6’s short time,180’s long time |
Efficiency: | >95% |
Load power factor | 0.8 |
Phase | single phase |
Operating temperature | 0-40℃ |
Storage temperature | -15℃-45℃ |
Operating relative humidity | 10%RH-102%RH |
Customize option for specification and availability please contact TAILEI | |
DIMENSION WEIGHT
MODEL | QTY/CTN | MEAS(cm) | G.W.(kg) | N.W.(kg) | COMTAINER20(PCS) |
TLS（H）-500VA | 4 | 53*27*32 | 12 | 11 | 2400 |
TLS（H）-1000VA | 4 | 53*27*32 | 15.4 | 14.4 | 2400 |
TLS（H）-1500VA | 4 | 53*27*32 | 19 | 18 | 2400 |
TLS（H）-2000VA | 4 | 53*27*32 | 21 | 20 | 2400 |
TLS（H）-3000VA | 2 | 69*30*24 | 17.5 | 16.5 | 800 |
TLS（H）-5000VA | 2 | 69*30*24 | 24 | 22.6 | 800 |
TLS（H）-8000VA | 1 | 44*37*24 | 16.5 | 15.5 | 700 |
TLS（H）-10000VA | 1 | 44*37*24 | 18.8 | 17.6 | 700 |
Precautions:
| 1. The voltage of network input must conform to the demand of AVR, for optimum operation.2. Connect all plugs securely.3. Always turn AVR power switch on first, the turn appliance power switch on.(Failure to do so may cause AVR fuse to blow)4. For best results, do not use if overload condition exists.5. Do not use in overly humid or flammable surroudings; avoid contact with any liquids.6. The relationship between the output capacity and input voltage as following picture and diagram: | |
Overload | Utmost using time |
20% | 60 minutes |
40% | 32 minutes |
60% | 5 minutes |
Long time overload is forbidden.