TLB wall mount series RELAY CONTROL AC automatic voltage stabilizer , mainly put in wall which is saving big space in house, especially used connecting fireplace in commonwealth of independent states and very popular there.
This kind voltage stabilizer choose abroad chip and zero-crossing design and making relay in cutting in near zero position and producing small fire and in order to extend the service life of the product.
We choose our own ring coil and increase its efficiency and provide good price based on same quality.
Meanwhile we add over-current protection function when our customer don’t know what load from their appliance and it will stop if current is over our setting request and protection them. Also with compressor and motor inside with big start current. It is very necessary for this kind function.
The advantages of this model:
1.Wide input voltage:AC 140~260V or 100-260VAC Or customize
2.High technology:programmed control computerized
3.Fashion design:LED display which can show all protection functions.
4.Quality insurance:Main spare parts made by ourselves,for example,transformer,PCB.
5.Perfect protection function:over/low voltage protection,over-heat/load protection,short circuit protection.
6.Option function:with voltage regulator and mains supply two kind output voltage choice function,in mains supply relatively stable season,the user can put voltage stabilizer in mains supply state,there is no power consumption,it is economic and convenient.
7.High efficiency:More than 95%
SPECIFICATIONS
Model | TLB-1000 | TLB-2000 | TLB-3000 | TLB-5000 | TLB-10000 | |
Power | 1000VA/600W | 2000VA/1200W | 3000VA/1800W | 3000VA/1800W | 5000VA/3000W | |
Phase | Single Phase | |||||
Technology | CPU based Digital Circuit | |||||
Indicator | LED graphic | |||||
Display Status | working, time delay, failure | |||||
Input | Voltage | AC 140~260V or 100-260VAC Or customize | ||||
Frequency | 50/60 Hz | |||||
Output | Voltage | 220Vac 110Vac | ||||
Precision | +/-10% | |||||
Protection | Over-heat Protection | Yes | ||||
Circuit Protection | Fuse / Circuit Breaker / Air Break Switch | |||||
High Voltage Protection | Yes | |||||
Delay Time | 6/120Seconds | |||||
Safety Standards | CE, EN60950, En55024 | |||||
Efficiency | 98% | |||||
Operating Conditions | Operating Temperature | 0-40°C | ||||
Operating Relative Humidit | 10%RH~95%RH, Non-condensing | |||||
Storage temperature | -5°C-45°C | |||||
Appearance | AVR size (mm) | 310x200x65 | 310x200x65 | 380x250x100 | 380x250x100 | 450x350x120 |
AVR N.W. (kg) | 4.8 | 6 | 12.5 | 15.5 | 20 | |
Precautions:
1. The voltage of network input must conform to the demand of AVR, for optimum operation.
2. Connect all plugs securely.
3. Always turn AVR power switch on first, the turn appliance power switch on.(Failure to do so may cause AVR fuse to blow)
4. For best results, do not use if overload condition exists.
5. Do not use in overly humid or flammable surroudings; avoid contact with any liquids.
6. The relationship between the output capacity and input voltage as following picture and diagram:
Overload | Utmost using time |
20% | 60 minutes |
40% | 32 minutes |
60% | 5 minutes |
Long time overload is forbidden.